Guides

Short answers to the questions that come up.

Constructions, fits and measuring, in plain words. Inside Stitchwork the same notes appear beside the choices they help with.

Constructions

Full canvas, half canvas, fused: what each is and who it suits.

Full canvas

A canvas of wool and horsehair runs the whole length of the jacket front, stitched in, not glued.

The canvas floats between the cloth and the lining, so the front moulds to the wearer over time and the lapel rolls softly. It is the most work and the most cloth-friendly construction, and it lasts: there is no glue to let go after years of cleaning.

Best for: Clients buying a suit to keep, fine and lightweight cloths, and anyone who wears a jacket most days.

Half canvas

Canvas through the chest and lapel, with a light fusing below.

The part that gives a jacket its shape, the chest and the lapel roll, is canvassed like a full-canvas jacket. Below the chest the front is fused, which keeps weight and cost down.

Best for: Most clients. It gives the shape and the lapel of a canvassed jacket at a middle price, and is the sensible default.

Fused

The front is given its body by an interlining glued to the cloth.

Quick to make and the least expensive. The front is flatter and a little stiffer than a canvassed one. Modern fusing is reliable, but heat and repeated dry cleaning can eventually make it bubble.

Best for: Entry-price suits, uniforms and garments for one occasion.

Single layer chest and shoulder

One light layer of fusing in the chest and a single thin shoulder pad.

A softer, lighter build than standard fusing, with less structure in the shoulder. The jacket sits closer to the body's own shape.

Best for: Summer jackets, relaxed tailoring and clients who dislike a built-up shoulder.

No chest canvas

No canvas in the chest: the cloth and the cut do the work.

The lightest and softest option, closer to a shirt-jacket or a cardigan than a structured suit. It needs a cloth with some body of its own, and it shows the wearer's shape as it is.

Best for: Unstructured summer jackets, casual blazers and linen. Not for sharp business suits.

Casual U canvas

A light canvas shaped around the chest only, built for casual jackets.

Thinner and softer than a business canvas, it supports the chest without pressing on it. The jacket keeps a natural line but does not collapse.

Best for: Soft, natural-shoulder jackets in heavier or looser cloths.

Machine made

The standard construction for shirts.

Shirts are machine sewn throughout. The choices that change how a shirt feels are the collar and cuff interlinings and the cloth, not the construction.

Best for: All shirts.

Which fit

A fit is a shape, not a size.

Each garment is offered in a few fits. Here is who each is for, and what to watch.

Men's suits and jackets

Classic Business · The default, and the safest choice for any build.
The most adjustable block, in any cloth, from body measurements, garment measurements or a standard size.
Soft Business · A client who wants a business suit that feels lighter.
The classic line with very thin shoulders and a lighter chest. Any cloth.
Soft Casual · Natural-shoulder, relaxed jackets.
Closer armhole and very light pads. Works best in heavier, looser cloths that drape; avoid stiff, fine suitings.
European Classic · A close, short, modern cut.
Little ease, a neater armhole and a shorter length. Be sure the client wants it close.
Sporty Jacket · Travel and active wear.
No pads, canvas or lining, and room to move the arms. Stretch casual cloths only.
Japan Classic · A slim business cut on standard sizes.
Standard sizes only, with few adjustments. Use one of the other fits for a made-to-measure client.

Men's trousers

Classic Business · The default for suit trousers.
Fully adjustable, any cloth.
Chino · Casual trousers with a cleaner seat and longer-looking leg.
Curved waistband; choice of waistband lining.
Drawstring · Relaxed, casual trousers.
Waistband, fly, pockets, pleats and hem can all be chosen.
Shorts · Tailored shorts with a turn-up.
Same choices as the drawstring trousers.

Men's shirts

Classic Business · The default shirt, for any build.
Fully adjustable.
Soft Casual · Athletic builds: a bigger drop from chest to waist.
More shape through the waist.
Europe series · A fitted shirt with a longer back.
Front shorter than the back; strong chest-to-waist shaping.
Overshirt · Worn open or as a layer.
From garment measurements or a standard size, not body measurements.

Men's overcoats

Classic Business · The default coat, to wear over a suit.
Less waist shaping than a jacket. Overcoat-weight cloths only.
Raglan sleeve · A straight, soft, unstructured coat.
No shoulder or sleeve-head padding. From garment measurements or a standard size.

Women's tailoring

Classic Business · The default jacket, trousers, waistcoat and coat.
Fully adjustable, any cloth. The jacket is on the shorter side.
Fashion Long · A longer jacket with a higher waist.
The jacket hangs below the sleeve.
Straight cut (H) · A relaxed, oversized jacket or coat.
Unstructured chest; little waist shaping.
High-waisted wide leg trousers · A fuller hip or a big difference between waist and hip.
Works best in cloth with some stretch.

Measuring

How each measurement is taken.

A few rules first, then each measurement of the body, and each of a finished garment laid flat.

  • Measure over a shirt and light trousers, never over a jacket or thick jumper.
  • Keep the tape level and snug, not tight: it should not dent the body.
  • Have the client stand naturally, looking ahead. People straighten up when measured; wait until they relax.
  • Take each measurement twice. If the two differ, take a third.
  • Write down posture as well as numbers: sloping or square shoulders, a forward stoop, a prominent seat or stomach. The maker cuts for these.
  • For a finished garment, lay it flat on a table and smooth it without stretching. Measure a garment that fits the way they want the new one to.

The body

Height
Without shoes, standing straight against a wall.
Weight (kg)
In kilograms. It helps the maker judge build; ask, do not guess.
Neck
Around the base of the neck where a shirt collar sits, with one finger inside the tape.
Chest
Around the fullest part, tape level under the arms and across the shoulder blades, arms relaxed at the sides. Do not let them breathe in.
Waist
Around the stomach at its fullest, usually at the navel. This is the jacket waist, not where trousers sit.
Seat / hips
Around the fullest part of the seat, feet together, tape level. Empty the pockets first.
Shoulder width
Across the back from the bone at one shoulder point to the other, following the curve below the neck.
Sleeve length
From the shoulder point down the outside of a slightly bent arm to where the cuff should end, usually the wrist bone.
Bicep
Around the fullest part of the upper arm, arm relaxed.
Wrist
Around the wrist bone. Ask which wrist they wear a watch on.
Jacket length
Down the back from the base of the collar to where the jacket should end, usually just covering the seat.
Trouser waist
Around the body where they wear their trousers, which is lower than the natural waist for most men.
Outseam
Down the outside of the leg from the top of the waistband to where the trouser should end, with shoes on.
Inseam
From the crotch down the inside of the leg to the same finishing point.
Thigh
Around the fullest part of the thigh, just below the crotch.
Knee
Around the knee with the leg straight.
Trouser cuff
The width they want at the bottom of the trouser, measured around. Compare a pair they like.
Nape to waist
Down the spine from the bone at the base of the neck to the natural waist. Tie a tape or cord round the waist first so both ends are sure.
Front waist length
From the point where the neck meets the shoulder, down over the fullest part of the chest, to the natural waist at the front.
U-rise
From the top of the waistband at the centre front, down through the legs and up to the top of the waistband at the centre back, where they wear their trousers.
Back waist height
Not a length of the body: how far below the natural waist the trousers sit at the back. Tie a band level round the natural waist, then measure straight down the centre back from the band to the top of the trouser waistband. Usually a few centimetres.
Front waist height
The same at the front: straight down the centre front from the band round the natural waist to the top of the trouser waistband. Usually a little more than at the back, and more where the trousers sit under a stomach.

A finished garment, laid flat

Jacket chest
Jacket buttoned and flat. Measure straight across from the lowest point of one armhole to the other, and double it.
Jacket waist
Across the narrowest part of the buttoned jacket, a hand's width above the lower pockets, and double it.
Shoulder
Across the back from shoulder point to shoulder point, just below the collar.
Sleeve
Sleeve smooth, from the shoulder point to the middle of the cuff edge.
Jacket length
Down the centre back from the collar seam to the hem.
Trouser waist
Trousers fastened and flat, along the top of the waistband, and double it.
Seat
Trousers flat with pleats closed, straight across just above the bottom of the fly, and double it.
Thigh
Front of the trouser upwards. Straight across the leg just below the crotch, and double it.
Knee
Straight across the leg at the knee, and double it.
Outseam
Down the side from the top of the waistband to the hem.
Cuff
Straight across the hem, and double it.

The same notes, beside the choices.

Inside Stitchwork each guide sits next to the choice it helps with, and your maker's own stages and rules join them once you connect.

A card is needed. You pay for the plan and credits, nothing else.